Can-Bus Amp Features; Operate; Mute; Global Standby - Classe Audio Delta PRE Owner's Manual

CAN-Bus amp features The following CAN-Bus features are available on the Delta MONO / STEREO.
Operate The Operate button allows you to bring the target unit in and out of standby.
Mute Engaging Mute will mute the output of the target unit.
Global Standby By setting all your components to Global Standby you can bring your entire
Global Dim By setting all your components to Global Dim (referred to as Global Brightness
Selecting a unit on the CAN-Bus devices screen identifies it as the target unit.
The front panel LED(s) or meter light of the target unit will start flashing (unless
you choose the unit that you are using to access CAN-Bus).
Once you have chosen the target unit, the touch screen will list the CAN-Bus
features available to it. Some CAN-Bus features are shared by all models, some
are specific to individual models.
Make sure to exit the CAN-Bus pages before putting your unit(s) into
Standby, otherwise the previously selected unit will continue to flash its
front panel LED when powering up the next time.
The model, name and firmware version number will be displayed on the
CAN-Bus page of the targeted unit.
This button will be disabled for the unit whose touchscreen you are using to
access CAN-Bus.
system in and out of standby by pressing the standby button of any unit or
remote. All CAN-Bus software updates automatically set the updated unit
to Global Standby. If you want a particular unit to be excluded from Global
Standby, deselect Global Standby for that unit.
in earlier models), you can adjust the touchscreen and LED brightness for your
entire system by changing the brightness of a single touchscreen. All CAN-Bus
software updates automatically set the updated unit to Global Dim. If you want
35