Classe Audio Delta PRE Owner's Manual page 15

1
2
3
CONFIG
SELECT
SOURCE
SELECT
4
MENU HOME
5
TONE BAL
6
5 Navigation & Menu Buttons
The remote control contains the navigation buttons and the menu access
buttons. This array of buttons is used for navigating the menu system on
the Delta PRE as well as providing basic transport controls to USB and
AirPlay-connected sources. Each of the buttons performs the following
function(s):
• MENU accesses the main screen for the menu system, in the
same fashion as the front panel Menu button.
• HOME returns the touchscreen display to the Home page. The
HOME button essentially acts like a "back to start" button – no
matter how deeply you've navigated into the menu system, a
single button push returns you to the front page.
• Navigation Arrows are located in the familiar Up (p), Down
(q), Left (t), and Right (u) arrow positions which allow
you to select the different menu options within the menu
system. When on the Home page, these buttons instead serve as
transport controls for USB and AirPlay sources with the typical
play/pause, stop, scan/skip forward and scan/skip backward
commands.
• Pressing the ENTER button selects the underlined menu item in
any menu screen.
• TONE accesses the Tone Control screen. Pressing Tone while on
the Tone Control screen activates the tone control. Subsequent
presses toggle between enable and not enable. While on the
Tone Control screen, the volume up/down keys adjust the tone
control. See Tone Control Setup in the Menu System section for
more information.
• BAL is used to access the Left/Right balance. Use the Volume
arrows to adjust the L/R balance.
6 Function Keys (F1 to F8)
The last eight buttons on the remote control are the Function buttons,
or Fkeys, which provide additional flexibility to the Delta PRE remote
control. Think of them as "favorite" buttons that provide direct access to
specific functions or commands not covered by the other buttons. Refer to
the Remote Fkeys description in the Menu System section found later in
the manual for more information.
Note: You may also remotely control the Delta PRE by connecting it to a
Network and using the Classé App, available free of charge in the Apple App
and Google Play stores. The Classé App allows enhanced functionality compared
with the IR remote, and control can be exercised without line-of-site contact
with the unit.
15