Disengaging Cruise Control - Mack Granite GU Series Operator's Handbook Manual

150 OPERATION

Disengaging Cruise Control

To turn off the cruise control system, move the Speed Control switch to the
OFF position.
Note: If the Speed Control switch is moved to the OFF position, the process of setting
cruise control must be repeated in order to re-activate cruise control (unless the Initial
Set Using Resume Switch feature is enabled).
To temporarily disengage cruise control, disengage the clutch or apply the
service brakes.
Note: If cruise control is temporarily disengaged using the clutch or service brakes,
press the Resume switch to resume the previously programmed speed.