Stalk Switch (If Equipped, Co-Pilot® Only) - Mack Granite GU Series Operator's Handbook Manual

94 INSTRUMENTS AND CONTROLS
1. Handle in Right Turn Position and
Cancel Position of Hazard Warning
2. Handle in Left Turn Position and
Cancel Position of Hazard Warning
3. Pull for Warning Hazard Position
Stalk Switch (If Equipped, Co-Pilot® Only)
The stalk switch (Co-Pilot® only) is located on the right side of the steering
column and contains three depressible buttons: ESC, Enter (↵ ) and Up
& Down. The stalk switch is used to access, navigate, view and change
information available in the driver information display (Co-Pilot® display).
The following illustration shows the stalk switch.
1. ESC (Escape)
2. ↵ (Enter)
Navigation of Co-Pilot® Menu
ESC BUTTON
The ESC (Escape) button on the stalk switch takes the Co-Pilot® back to the
previous screen or level in the menu.
Note: The ESC button does not function at Start Up or when the vehicle is moving.
The ESC button is used only when the vehicle is stationary.
ENTER (↵ ↵ ↵ ) BUTTON
The Enter (↵ ) button on the stalk switch selects the highlighted menu items
during menu selection. During Start Up and when moving the vehicle, the
Enter(↵ ) button is also used to confirm or acknowledge a pop-up screen.
4. Push for Courtesy Flashing of High
Beams
5. Push for Courtesy Flashing of
Marker Lights (Daylight or Dark)
6. Lift Handle for Headlight Dimmer
3. Up & Down
C0029226