Huawei SUN2000-63KTL-JPH0 User Manual page 76

SUN2000-63KTL-JPH0
User Manual
Figure 7-10 Grid parameters
Table 7-4 Grid parameters
Parameter
Grid Code
Isolation settings
Output mode
Automatically start upon grid
recovery
Issue 06 (2020-02-18)
Description
Set this parameter based on the grid code of the country or region where the
inverter is used and the inverter application scenario.
Set the working mode of the inverter based on the grounding status at DC
side and the connection to the power grid.
Specifies whether the inverter output has a neutral wire based on the
application scenario.
Specifies whether to allow the inverter to automatically start after the
power grid recovers.
Copyright © Huawei Technologies Co., Ltd.
7 Man-Machine Interactions
69