SUN2000-63KTL-JPH0
User Manual
7.1.4 Operations Related to the Advanced User
Ensure that the DC side of the SUN2000 is energized before setting grid parameters,
protection parameters, and feature parameters.
7.1.4.1 Setting Grid Parameters
Procedure
Step 1 Choose Settings > Grid parameters to set grid parameters.
Figure 7-7 Grid parameters
Table 7-1 Grid parameters
Parameter
Grid Code
Isolation settings
----End
7.1.4.2 Setting Protection Parameters
Procedure
Step 1 Choose Settings > Protection parameters to set protection parameters.
Figure 7-8 Protection parameters
Issue 06 (2020-02-18)
Description
Set this parameter based on the grid code of the country or region where the
inverter is used and the inverter application scenario.
Set the working mode of the inverter based on the grounding status at DC
side and the connection to the power grid.
Copyright © Huawei Technologies Co., Ltd.
7 Man-Machine Interactions
63