Huawei SUN2000-63KTL-JPH0 User Manual page 50

SUN2000-63KTL-JPH0
User Manual

Do not connect loads between the SUN2000 and the AC switch.
Requirements for the OT/DT terminal



Issue 06 (2020-02-18)
occurs, select a proper overcurrent protection device in compliance with local power
distribution regulations.
Connect the AC output power cable according to the requirements specified by local
power grid operators.
If a copper cable is used, use copper wiring terminals.
If a copper-clad aluminum cable is used, use copper wiring terminals.
If an aluminum alloy cable is used, use copper-aluminum transition wiring terminals, or
aluminum wiring terminals along with copper-aluminum transition spacers.
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connections
43