Huawei SUN2000-63KTL-JPH0 User Manual page 62

SUN2000-63KTL-JPH0
User Manual


Procedure
Step 1 Turn on the AC switch between the SUN2000 and the power grid.
If you perform
You can start the SUN2000 only after the fault is automatically rectified.
Step 2 Turn on the DC switches at the bottom of the SUN2000.
Step 3 Perform quick settings on the SUN2000 app. For details, see
----End
Issue 06 (2020-02-18)
Before turning on the AC switch between the SUN2000 and the power grid, use a
multimeter set to the AC position to check that the AC voltage is within the specified
range.
If the solar inverter has not been running for more than half a year after being mounted, it
must be checked and tested by professionals before being put into operation.
Step 2 before
Copyright © Huawei Technologies Co., Ltd.
Step 1, the SUN2000 reports a fault about abnormal shutdown.
6 Commissioning
7 Man-Machine Interactions.
55