Huawei SUN2000-63KTL-JPH0 User Manual page 66

SUN2000-63KTL-JPH0
User Manual
Procedure
Step 1 Run the app and select a connection mode.
1.
Issue 06 (2020-02-18)
a. The USB data cable is connected from the USB port at the bottom of the SUN2000
to the port on the mobile phone.
b. If the USB data cable is successfully connected, the message Connected to USB
Accessory will pop up on the phone. Otherwise, the cable is not connected.
 The screenshots in this document correspond to the SUN2000 app 3.2.00.003 (Android) and
FusionSolar app 2.5.7 (Android).
 When the WLAN connection is used, scan the QR code of the WLAN module to access the login
screen.
 When the WLAN connection is used, the initial name of the WLAN hotspot is Adapter-WLAN
module SN, and the initial password is Changeme. Use the initial password upon first power-on
and change it immediately after login. To ensure account security, change the password periodically
and keep the new password in mind. Not changing the initial password may cause password
disclosure. A password left unchanged for a long period of time may be stolen or cracked. If a
password is lost, devices cannot be accessed. In these cases, the user is liable for any loss caused to
the PV plant.
 When the Bluetooth connection is used, the connected Bluetooth device is named after last 8 digits
of the SN barcode+HWAPP.
 After you select Use by default for this USB accessory, a message that asks you to confirm the
USB access will not appear if you log in to the app again without removing the USB data cable.
(Scenario in which the SUN2000 is connected to the FusionSolar hosting cloud) Run the
FusionSolar app and access the Device Commissioning screen.
Copyright © Huawei Technologies Co., Ltd.
7 Man-Machine Interactions
59