Huawei SUN2000-63KTL-JPH0 User Manual page 52

SUN2000-63KTL-JPH0
User Manual
Figure 5-7 AC terminal block dimensions
Procedure
Step 1 Remove the sealing nut and rubber liner from the cable gland.
Step 2 Select an appropriate rubber liner based on the cable outer diameter.
Step 3 Make the cable and crimp the OT/DT terminal.
Step 4 Route the cable through the cable gland.
Step 5 Secure the AC output power cable and PE cable.
Step 6 Tighten the cable gland.
Issue 06 (2020-02-18)
This document introduces how to install the four-core AC output power cable, which can be a reference
for installing the three-core cable. The three-core cable does not need a PE cable installed in the
maintenance compartment.
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connections
45