Power Off During Co Room Test - Extech Instruments CO80 Manual

4.7.3

Power Off During CO Room Test

See Section 5.5.2 to activate the CO Room test.
Note: Power cannot be turned off in this mode without
printing/saving the stored readings for that report.
Pressing the "On/Off" key during the CO room test alternates the following
two screens every second:
4.7.3. Turning Off During CO Room Test (Cont.)
To turn the power off in this mode, press the "On/Off" button to return to
the CO room test displays, as shown below.
Pressing the "Log" key brings the "Save, Print, Send" menu at the bottom
of the screen. Press "Scroll" for "Print" to flash. Press and hold "Log" to
send the readings to an IR printer - readings are automatically saved in
the memory. Only now can pressing the "On/Off" key turn off the power.
23
CO80 V3.1 04/06