Indication of the start session command can be viewed through the logger's status information group described in
Section 5.3.2.
5.9.2 Stopping a Session
The logger can be set to stop a session by navigating to the following menu item.
Session Control -> Stop
Indication of the stop session command can be viewed through the logger's status information group described in
Section 5.3.2.
The internal buffers must be flushed before Ngara returns back to the standby state
5.9.3 Taking a Reference Level
Reference levels can be recorded to the log file by navigating to the following menu item
Session Control -> Take Reference
Version — 25-7cd7566
Figure 29: Session Configuration
Figure 30: Stopping a Session
Ngara
User Manual
Page — 62 of 80