Keep Alive; Factory Default - Acoustic Research Ngara User Manual

4. Confirm selection by pressing ENTER
Toggle will cycle power to the USB device, whilst Constant will maintain the USB drive powered on.
The Toggle option was designed to be used in conjunction with large mechanical drives, when using

solid state flash drives it is recommended to use Constant power mode.
This menu item is not accessible when in recording mode.


4.4.8 Keep Alive

The keep alive menu item allows the setting of the internal Real-Time-Clock (RTC) daily alarm. It can be set to
either On or Off.
When set to On, the RTC alarm is configured to generate a wake-up signal at 7am each day. This ensures Ngara
powers up in the event it lost power.
To change the current timeout settings, the following steps must be carried out –
1. Activate menu item by pressing ENTER
2. Ngara will display current setting
3. Toggle setting using SELECT
4. Confirm selection by pressing ENTER
This menu item is not accessible when in recording mode.


4.4.9 Factory Default

Sets the Ngara unit back to a standard Factory configuration. Note that there is no option to alter a standard Factory
Default configuration.
1. Activate menu item by pressing ENTER
2. Once the menu item is selected, the user is given the chance to confirm or cancel the configuration update.
"Y" confirms the update, "N" cancels the update.
• Pressing SELECT toggles between "Y" and "N"
• Pressing ENTER accepts value.
Activating factory default will set the settings to those shown in Table 16
Version — 25-7cd7566
Table 16: Factory Settings
Description Setting
Idle timeout
Enabled
Ancillary timeout
Enabled
Ngara
User Manual
Page — 29 of 80