Table of Contents
Advertisement
2.3.1 Enclosure Back
The back of the enclosure contains the following connections –
• Aux connector (4-pin)
• Ethernet communications port (RJ-45)
This port can be used to connect to a Local Area Network (LAN) to provide a communications link to Ngara
• USB ports (2x USB ports)
The USB ports allow the connection of a single storage device
• 12V Output Connector
Provided as standard on Ngara Black systems
Data will be lost if the storage device is removed during a logging session.
Please refer to Section 4.5.4 for details on ensuring there is no data loss.
2.3.2 Enclosure Front
The front of the enclosure is provided with the following connector –
• Microphone Connector
Inserting the plug and screwing it in until firm connects the microphone lead to Ngara
Over tightening can lead to internal board damage
Version — 25-7cd7566
Figure 1: Back Enclosure
Figure 2: Front Enclosure
Ngara
User Manual
Page — 10 of 80
Advertisement
Table of Contents
