Table of Contents
Advertisement
5.2 Main Screen
The main window of the application displays the data Ngara has processed. It also displays any current logger
warnings along the bottom status bar.
These warnings cannot be reset.
Please contact Acoustic Research Labs if any warning messages appear.
5.3 Linking to a logger
The software is used to connect to any Ngara that is capable of communication over the Ethernet port. The way
this is achieved is highly dependant on the network configuration settings set on the Ngara, see Section 4.4.3.
If the Ngara can be accessed within a local network, and is set to DHCP mode (See Section 4.4.3.2), Ngara may
also be accessed using the following address name ngara-XXXXXX. Where XXXXXX is the unit's serial number. This
name is then resolved to an IP address by the DHCP server, thus saving the need to remember IP address numbers.
As there are numerous network configuration options please consult with your local network administrator
for proper configuration
This section will assume that a correct network topology has been implemented, and a valid IP address has been
assigned.
To link to a Ngara -
Version — 25-7cd7566
Figure 5: Main Program Window
Ngara
User Manual
Page — 43 of 80
Advertisement
Table of Contents
