Logger Reboot; Logger Shutdown - Acoustic Research Ngara User Manual

After applying a 1kHz reference level, enter in the expected reading (in dB) and the logger will perform a system
calibration.
A steady signal must first be detected before the OK button is enabled


5.7 Logger Reboot

For logger versions V 7.06 and later, it is possible to remotely reboot the Ngara by navigating to the following menu
item
File -> Reboot...
Ngara waits for any running USB and Noise Cloud operations to stop before rebooting


5.8 Logger Shutdown

The logger can be forced to power down by navigating to the following menu item.
File -> Sleep...
Version — 25-7cd7566
Figure 25: System Calibration Option
Figure 26: Logger Reboot
Ngara
User Manual
Page — 60 of 80