Table of Contents
Advertisement
The Ethernet interface will be powered off in between upload periods
4.8.5 Exit
Return to top menu structure.
To return to the top level menu structure, the following steps must be carried out -
1. Activate menu item by pressing ENTER
4.9 Status and Idle Screen
The idle screen is displayed when the following occurs:
• Through the Show Status menu item, or
• Ngara is idle for more than 120 seconds, or
• A connection to the Remote PC application is found
The screen circulates through current logger information and displays any warnings or errors that may be present.
It is possible to speed up circulation by using the SELECT push-button. It is also possible to exit the idle screen by
pressing the ENTER push-button, unless a remote PC connection is found. In this case the HCI Connection screen
is displayed.
Not all screens may appear as some screens are skipped if no valid information is present. Details of each screen are
shown in Table 20.
Name
Version
Serial
Time and Date
Logger State
USB Session
Noise Cloud Session
Session Errors
Disk State
Main Battery Status
RTC Battery Status
Temperature
PCM Mode
Time Weighting
Trigger Status
Alarm Status
Noise Cloud Status
Noise Cloud Interval
Noise Cloud State
Noise Cloud Upload
Version — 25-7cd7566
Table 20: Status Screens
Description
Current firmware version
Unit serial number
Current time and date
Current logger state
Current USB Session state
Current NC Session state
Current USB Session error
Current disk state
Current 12V Battery indicator
Current Internal Battery indicator
Current internal temperature
Current PCM recording setting
Current Time Weighting setting
Trigger configuration
RTC Alarm configuration
Last Noise Cloud upload status
Next interval time to be uploaded
Current Noise Cloud state
Current Noise Cloud upload period
User Manual
Example
Ver: Vxx.x.x
Serial: 878xxx
DD/MM hh:mm:ss
Standby
Logging -> USB
Logging -> NC
Disk Full
Disk Present
Main Bat: x.x.x
RTC Bat: OK
Temp: xx.x C
Wav Rec:48kHz
TWeight: FAST
Trigger Enabled
Alarm Clk Enabled
NC: OK
NC: DD/MM hh:mm
NC: Buffering
NC: 15min Cycle
Page — 40 of 80
Ngara
Advertisement
Table of Contents
