The Result Group; The Status Group; The General Information Group - Acoustic Research Ngara User Manual

1. Enter the loggers IP Address in the IP Address box
2. Press the Link Button
3. A password prompt will appear
4. Enter loggers remote password as previously set in Section 4.4.3.1
5. Connection will be established
To disconnect from a remote logger -
1. Press the Disconnect button, or simply lose the application

5.3.1 The Result Group

Through the results group it is possible to view all of the current results simultaneously.
Through the results group it is also possible to-
• Change current time weighting whilst in standby mode
• Enable maximum hold markers through the tick boxes provided
• Reset the maximum hold markers through the push button provided
The display is updated every 100ms


5.3.2 The Status Group

General logger status messages can be viewed through the status group box.
The status group shows the following information-
• Current Logger State
• Current Session State
• Current Logger Operations
• Current Disk State
• Current Session Error
• Session Name

5.3.3 The General Information Group

The general information group displays current battery states along with date and time of logger, and current logger's
serial number.
Version — 25-7cd7566
Ngara
User Manual
Page — 44 of 80