Acoustic Research Ngara User Manual page 25

Setting
DHCP
Auto
Manual
Consult with your network administrator to determine the most appropriate network settings for your

Ngara.
Generally, DHCP is preferred.
To change the IP mode of operation, the following steps must be carried out -
1. Activate menu item by pressing ENTER
2. Ngara will display current setting
3. Toggle setting using SELECT
4. Confirm selection by pressing ENTER
4.4.3.3 IP Address
The IP address menu item allows the configuration, or display of the IP address currently configured for the Ngara.
To view currently assigned IP address, the following steps must be carried out -
1. Activate menu item by pressing ENTER
2. Ngara will display current setting
If the Ethernet device was configured to operate in Manual mode, then the menu item will also allow updating of
the stored IP Address.
To update the Manual IP address, each digit is edited with the following -
3. Each digit must be entered separately - selected digit is shown by cursor
• Pressing SELECT will increase selected digit by one.
• Pressing ENTER will confirm current digit and move to next digit
4. Once the final digit is reached, pressing ENTER will confirm entered address
4.4.3.4 Net mask
The IP Net mask menu item allows the configuration of the network Net mask to use.
To set current Net mask, the following steps must be carried out -
1. Activate menu item by pressing ENTER
Version — 25-7cd7566
Table 14: IP Modes
Description
Ngara will obtain all configuration using a DHCP server
Ngara will set a Windows Auto-IP compatible address
Ngara is configured with a Static IP address, along with a gateway
and a net mask.
Ngara
User Manual
Page — 25 of 80