Changing Logger Configuration; General Logger Configuration Tab - Acoustic Research Ngara User Manual

5.4 Changing Logger Configuration

Logger configuration can be updated by navigating to the following menu item
File -> Logger Configuration -> Change Configuration

5.4.1 General Logger Configuration Tab

Ngara configuration tab allows general configuration changes to be made. Details of each configuration option is
listed on Table 22.
Item
Idle Timeout
Ancillary Timeout
Network Configuration
Band Pass Filter
Version — 25-7cd7566
Figure 6: Logger Configuration Menu
Figure 7: Main Logger Configuration
Table 22: General Logger Configuration
Description
Enable or Disable the unit idle timeout setting
Enable or Disable the unit ancillary timeout setting
Update all aspects of network configuration options
Update the band edges for the provided band pass filter. This option is
only provided when configured for Industrial Noise Monitor mode.
Ngara
User Manual
Page — 45 of 80