FENDT Bianco Series Manual page 66

07-6
Rules for the mains connection:
•
Use only a 3 x 2.5 mm
length of 25 m, a CEE plug and connector to
connect the camper to an external 230 V
mains.
If the mains operates via a cable
drum, this must be completely
unwound, as otherwise induction may
cause the cable to heat up and burn.
•
The 230 V mains connection in the camper
has been designed for a total power
consumption of 2300 W. If additional devices
requiring electricity are connected, such as
water heaters, etc., you must ensure that this
electric power value is not exceeded, taking
other electrical equipment into account that is
in use, e.g. refrigerator, therme, etc.
Please also note the manufacturer's
separately enclosed operating instruc-
tions.
Assignment of fuses for power
supply
Fuses are assigned as follows (from left to right):
1st circuit 1 / 5A
2nd circuit 2 / 10A
3rd circuit 3 / 10A
4th circuit 4 / 15A
5th circuit 5 / 15A
Please also note the separately enclo-
sed circuit diagram for the 12 V electri-
cal supply.
cable with a maximum
2