Control Panels - FENDT Bianco Series Manual

7.2 Control panels

Diamant
07-2
Display
The date, time, internal and external temperature
are always shown on the main screen. If there
is no temperature sensor, if it is broken or the
temperature is outside the indicating range, two
lines are shown instead of the temperature.
Control elements
Push button for turning the display on
and off. If this button is pressed for lon-
ger than two seconds, you will enter the
programming menu. In the programming
menu, this button is used for confirming.
Push button to display the level of water
in the fresh water container. This will be
displayed for 30 seconds on the screen.
In the programming menu, this button is
used abort.
Illuminated push button to turn the
heating on and off. In the programming
menu, this button is used scroll forward.
Illuminated push button to turn the boiler
on and off. In the programming menu,
this button is used scroll back.
Programming
If this button is pressed for longer than
two seconds, you will enter the program-
ming menu.
Use the arrows to scroll through the
functions. Select a function by pressing
the ENTER key again. You can now se-
lect the value you wish to change.
Use the arrows to increase or decrease
the selected value. Use the „Delete" key
to exit the current function and save the
data. If you press the button again you
will return to the main screen.