Undercarriage And Vehicle Registration; General Information - FENDT Bianco Series Manual

3. Undercarriage and vehicle registration

3.1 General information

Frame parts and axles are components of the
undercarriage. No technical modifications are
allowed; otherwise, the terms of operation are no
longer valid!
Technical modifications are only pos-
sible after the manufacturer has given
his consent.
For the sake of traffic safety, the vehicle under-
carriage must be maintained just as conscien-
tiously as the base vehicle itself. This mainte-
nance should be carried out by your Fendt dealer.
If spare parts are required, use only the original
parts designated by the manufacturer.
Generally, campers are not suitable
for pulling by lorries or buses. If this
is done permanently, they will be
damaged.
Greasing and oiling
Regularly examine and grease the sliding parts
and stationary parts of the undercarriage. If the
camper is used seldom, yearly maintenance is
required.
Overrun coupling for greasing and oiling
j
Grease the tie rod around the gangway bel-
lows
k
Grease the bearing screws on the pivot arm
and the brake lever above the lubricating
nipple
l
Grease the joint of the joint head
m
Oil the joints of the spring brake on the brake
lever
Recommended lubricant
multi-purpose grease in accordance with DIN
51825 KP2 G 30
Maintenance and adjustments to the
brake system may only be carried out
by an authorised specialist company!
03-1