Siemens SIMATIC S7-300 Manual For Migrating page 49

5 Software Conversion
Option 2: Migration with the migration tool
If STEP 7 V5.x and STEP 7 (TIA Portal) are installed on 2 different systems there
is also an alternative way to still carry out the migration. To do this, proceed as
follows:
Note The migration tool can be found on any installation DVD of STEP 7 (TIA Portal)
or in the following entry (for the current version of the TIA Portal):
https://support.industry.siemens.com/cs/ww/en/view/58638200
Table 5-7
Step
1. Open the Migration Tool TIA V13.
2. Select the source project in "Storage Location" with "Browse".
Enter the target path in "Intermediate file" via "Browse"
Tick "Include HW and Network data during the migration" if you not only want to migrate the
software but also the hardware.
3. Click "Migrate" to start migration. Once completed "intermediate.am13" is created in the
selected target directory.
4. Copy the file to the target system on which the TIA Portal is installed.
5. Open the TIA Portal.
6. Open the "Migrate project" menu item in the portal view.
Migration S7-300/S7-400 nach S7-1500
Entry ID: 109478811, V1.1,
Instruction
05/2017
49