Selection of switch operation (OUT1)
Select the switch operation required referring to the list of outputs (page 21).
Press the
button to select.
[1_n]: Reverse output
[1_P]: Non-Reverse output
Selection of switch operation (OUT2)
Select the switch operation required referring to the list of outputs (page 21).
Press the
button to select.
[2_n]: Reverse output
[2_P]: Non-Reverse output
Press the
Press the
Setting of initialize mode is completed.
Return to measurement mode.
-24-
button.
button.
No.PF※※-OMO0012-D