Setting Procedure Of Initialize Mode - SMC Networks PF2W7 Series Operation Manual

■Setting procedure of initialize mode

<Operation>
Press the button for 2 seconds or longer during measurement mode.
Selection of display mode
Select the display of instantaneous flow or accumulated flow.
Press the button to select.
[d_1]: display instantaneous flow
[d_2]: display accumulated flow
The product with unit selection function
Selection of unit selection function
Display unit can only be selected for products with unit selection unction.
Press the or
Display Instantaneous flow
[U_1] L/min

[U_2] gal(US)/min
: Refer to page
25 for the flow rate when [U_2] is selected.
Selection of output mode (OUT1)
Select the switch output mode required referring to the list of outputs (page 21).
Press the button to select.
[o10]: Instantaneous output mode
[o11]: Accumulated output mode
[o12]: Accumulated pulse output
mode
Selection of output mode (OUT2)
Select the switch output mode required referring to the list of outputs (page 21).
Press the button to select.
[o20]: Instantaneous output mode
[o21]: Accumulated output mode
[o22]: Accumulated pulse output
mode
button for selection.
Accumulated flow
L
gal(US)
-23-
Press the button.
Press the button.
Press the button.
Press the button. (continued)
SI unit only
No.PF※※-OMO0012-D