Height Adjustment; When The Freezer Door Does Not Align With The Height Of The Refrigerator Door - LG LSC20913TT User Manual

Installation
If the height of
freezer compart
ment door is
different from the
height of Refrig
erator compart
ment door
After leveling the
door height
Next
11

Height adjustment

If the freezer compartment
door is lower than the refrig-
erator compartment door
Level the door by inserting flat (-type)
driver into the groove of the left
height adjusting screw and rotate it
clockwise ( ).
①
When the freezer door does not align with
the height of the refrigerator door
Even if the height can not be aligned by using the height adjustment
screw, insert the transparent sheet supplied with the product.
Separate the door with the lower height, use the (+) type screwdriver to unscrew the
screw at the bottom hinge as shown at Figure
the bottom hinge and the bottom bracket, and then fix it with the screw as shown at
Figure ②
Insert more transparent sheets enough to align the height. (4 sheets are supplied in total.)
The refrigerator doors will close smoothly by heightening the front side by adjusting
the height adjusting screw. If the doors do not close correctly, performance may be
affected.
1. Wipe off all dust accumulated during shipping and clean your appliance thoroughly.
2. Install accessories such as the ice cube box, cover evaporating tray, etc., in their
proper places. They are packed together to prevent possible damage during shipping.
3. Connect the power supply cord (or plug) to the outlet. Don't double up with other
appliances on the same outlet.
If the freezer compartment
door is higher than the refrig-
erator compartment door
Level the door by inserting flat (-type)
driver into the groove of the right
height adjusting screw and rotate it
clockwise ( ).
①
Bottom hinge
Transparent sheet
①
②
Bottom bracket