Door Replacement; Feed Water Pipe Installation - LG LSC20913TT User Manual

Installation
Pass the refrigerator laterally through the access
Pass the
refrigerator door as shown in the right figure.

Door replacement

Feed water pipe installation

Before
installation
Warning
Disposal of the
This appliance contains fluids (refrigerant and lubricant) and is made of parts and
old appliance materials which are reusable and/or recyclable.
All the important materials should be sent to the collection center of waste material
and can be reused after rework (recycling). For recycling, please contact the local
recycling authority.
7
Mount them in the reverse sequence of removal after they pass through the access
door.
Automatic ice maker operation needs water pressure of 147~834 kPa (1.5~8.5
kgf/cm ) (That is, an instant paper cup (180 cc) will be fully filled within 3 sec.).
2
If water pressure does not reach the rating 147 kPa (1.5 kgf/cm
necessary to purchase a separate pressure pump for normal automatic icing and
cool water feed.
Keep the total length of the feed water pipe tube within 8 m and be careful for the
tube not be bent. If the tube is 8 m or longer it may cause trouble in water feed
owing to the drain water pressure.
Install the feed water pipe tube at a place free from heat.
Connect to a potable water supply only.
Max 5 4
3 2 1 Min 1 2
FRZ TEMP TEMP REF 3 4 Max 5
) or below, it is
2