Height Adjustment - LG GR-J257WSBN Owner's Manual

Sxs refrigerator
Table of Contents

Advertisement

Installation

Height adjustment

When the floor
- When the height of the door may not be leveled
is not leveled
Use the spanner to turn the nut of the height
adjustment screw on the left to the counterclockwise
direction to level the door.
Adjust the height of the door, insert the E ring.
A maximum of three rings (Only Freezer).
2 E rings are enveloped with owners manual.
Use the spanner to turn the nut of the height
adjustment screw on the right to the clockwise
direction to level the door.
When the fridge
door is lower
than the freezer
1. Use the
door
2. Use the
3. After aligning the height of the door,
CAUTION
Do not force too hard to level the height. The hinge pin can be pulled out.
(Adjustable range of height is a maximum of 2" (5 cm))
After leveling
The refrigerator doors will close smoothly by heightening the front side by adjusting the
the door height
height adjusting screw. If the doors do not close correctly, performance may be
affected.
1. Wipe off all dust accumulated during shipping and clean your appliance thoroughly.
Next
2. Install accessories such as the ice cube box, cover evaporating tray, etc., in their
3. Connect the power supply cord (or plug) to the outlet. Don't double up with other
17
when the floor is not leveled.
When the freezer door is lower –
When the fridge door is lower –
When the fridge door is lower than the freezer door while using the refrigerator,
level the doors.
tool for adjustment on
the wide side to turn nut
in the clockwise direction to loosen
the keeper nut.
tool for adjustment on
the narrow side to turn the
adjustment hinge pin
(
) clockwise direction or
(
) counterclockwise direction
to adjust the height of the fridge
and freezer doors.
turn the keeper nut in counterclockwise direction tightly.
proper places. They are packed together to prevent possible damage during shipping.
appliances on the same outlet.
Height difference
(
)
in
Height difference
When using the spanner
1 keeper nut
2 Adjustment
hinge pin
3 Tool for
adjustment
Down
Up

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gs-j5961ns

Table of Contents