Installation; Where To Install - LG LSC20913TT User Manual

Installation

Strong
and even floor
Select a good
location
Where water
supply can be
easily connected
in a dry place
Where it is free
from heat
5

Where to install

Unstable installation may cause vibration and
noise. If the floor to install the refrigerator on
is not even, make the refrigerator level by
rotating the height adjusting screw. Carpet
or floor covering on which a refrigerator is
installed may be discolored by heat from the
bottom of the refrigerator.
Do not allow carpet or flooring to block
airflow under the refrigerator.
1. Place your appliance where it is easy to use.
2. Avoid placing the unit near heat sources, direct
sunlight, or moisture.
3. To ensure proper air circulation around the
refrigerator, please maintain sufficient space on
both the sides as well as top and maintain at least
2 inches (5 cm) from the rear wall.
4. To avoid vibrations, the appliance must be leveled.
5. Don't install the appliance below
It may cause affect the performance.
Select a place where a water supply can be
easily connected between the automatic ice
maker and dispenser.
Installing the refrigerator in a wet or damp
area may cause rust and may be an electrical
hazard.
If this refrigerator is installed where the
ambient temperature is high, the freezing
capacity is deteriorated and the cost of
electricity used increases.
NOTE
Install the refrigerator at a place where the ambient temperature is 5˚C ~ 43˚C
•
(41˚F ~ 110˚F).
Ambient temperature outside this range may cause product malfunction. Also, the
tube between the dispenser and automatic ice maker may freeze.
5?C (41?F).
More than
2"(5 cm)
to back
Bottom Pad