Charging Your Philips Sonicare - Philips Sonicare HealthyWhite+ HX8923/34 Manual

8
English

Charging your Philips Sonicare

Battery status (when handle is not on charger)
35_020_9493_2_DFU-Luxury_A6_v1.indd 8
1 Plug the charger into an electrical outlet.
2 Place the handle on the charger.
-
The flashing light of the battery level
indicator indicates that the toothbrush is
charging.
-
When the battery is fully charged, the
battery level indicator lights up solid green
for 10 seconds before it turns off.
Note: It can take up to 48 hours to fully charge
the battery, but the Philips Sonicare may be used
before it is fully charged.
-
A flashing yellow battery level indicator
indicates a low charge.
-
A flashing green battery level indicator indicates
a moderate charge.
-
A solid green battery level indicator indicates a
full charge.
Note: If you hear 5 beeps and the battery level
indicator flashes yellow, this means that you have to
recharge the battery. When the battery is completely
empty, the Philips Sonicare turns off. Place the Philips
Sonicare on the charger to charge it.
To keep the battery fully charged at all times,
you may keep your Sonicare on the charger when
not in use.
12/11/15 11:06