Charging Your Philips Sonicare; Brushing Instructions - Philips sonicare 1000 Series Manual

10
English

Charging your Philips Sonicare

Using your Philips Sonicare toothbrush

Brushing instructions

2 Firmly press the brush head down onto the metal
shaft until it stops.
Note: It is normal to see a slight gap between the
brush head and the handle. This allows the brush
head to vibrate properly.
Plug the USB charging cord into a wall adapter that
1
is connected to a electrical outlet.
2 Place the handle on the charger.
- The light of the battery level indicator
illuminates and the handle beeps twice. This
indicates that the toothbrush is charging.
Note: It can take up to 24 hours to fully charge the
battery, but you can use the Philips Sonicare
toothbrush before it is fully charged.
If you are using your Sonicare toothbrush for the first
time, it is normal to feel more vibration than when
using a non-electric toothbrush. It is common for first
time users to apply too much pressure. Only apply
gentle pressure and let the toothbrush do the
brushing for you. Please follow brushing instructions
below for the best experience. To help you transition
to your new Sonicare power toothbrush, it comes with
the EasyStart feature turned on. This feature gently
increases the power over the first 14 brushings to help
you adapt to brushing with a Philips Sonicare
toothbrush.
Wet the bristles and apply a small amount of
1
toothpaste.