Charging Your Philips Sonicare; Using Your Philips Sonicare; Brushing Instructions - Philips Sonicare HealthyWhite HX6762/35 User Manual

Charging your Philips Sonicare

1 Plug the charger into an electrical outlet.
2 Place the handle on the charger. (Fig. 5)
-
The battery charge indicator next to the battery symbol flashes to
indicate that the toothbrush is charging.
Battery charge indicator
The battery charge indicator shows the approximate remaining
battery charge.
Deluxe charge indicator (specific types only):
-
Solid green: 50-100%
-
Flashing green: 10-49%
-
Flashing yellow: less than 10%
Standard charge indicator (specific types only):
-
Solid green: 50-100%
-
Flashing green: less than 50%
Note: When the battery is low, you hear 3 beeps after the completion
of the brushing cycle and the battery charge indicator flashes for
30 seconds.
Note: To keep the battery fully charged at all times, you may keep
your Philips Sonicare on the charger when not in use. It takes at least
24 hours to fully charge the battery.

Using your Philips Sonicare

Brushing instructions

1 Wet the bristles and apply a small amount of toothpaste.
2 Place the toothbrush bristles against the teeth at a slight angle
(45 degrees), pressing firmly to make the bristles reach the gumline
or slightly beneath the gumline. (Fig. 6)
Note: Keep the ce nter of the brush in contact with the teeth at all
times.
3 Press the power on/off and mode button to turn on the Philips
Sonicare.
9
English