Using Your Philips Sonicare; Brushing Instructions - Philips Sonicare HealthyWhite+ HX8923/34 Manual

Using your Philips Sonicare

Brushing instructions

35_020_9493_2_DFU-Luxury_A6_v1.indd 9
1 Wet the bristles and apply a small amount of
toothpaste.
2 Place the toothbrush bristles against the teeth
at a slight angle (45 degrees), pressing firmly to
make the bristles reach the gumline or slightly
beneath the gumline.
Note: Keep the center of the brush in contact
with the teeth at all times.
3 Press the power on/off and mode button to
turn on the Philips Sonicare.
4 Apply light pressure to maximize Philips
Sonicare's effectiveness and let the Philips
Sonicare toothbrush do the brushing for you.
Do not scrub.
5 Gently move the brush head slowly across
the teeth in a small back and forth motion so
the longer bristles reach between your teeth.
Continue this motion throughout the brushing
cycle.
6 To clean the inside surfaces of the front teeth,
tilt the brush handle semi-upright and make
several vertical overlapping brushing strokes on
each tooth.
Note: To make sure you brush evenly
throughout the mouth, divide your mouth into
4 sections using the Quadpacer feature (see
chapter 'Features').
9
English
12/11/15 11:06