Getting Started; Attaching The Brush Head; Charging Your Philips Sonicare; Brushing Instructions - Philips HealthyWhite+ Manual

Getting started

Attaching the brush head

1 Align the brush head so the bristles face the
front of the handle.
2 Firmly press the brush head down onto the
metal shaft until it stops.
Note: Philips Sonicare brush heads are imprinted with
icons to easily identify your brush head.

Charging your Philips Sonicare

1 Plug the charger into an electrical outlet.
2 Place the handle on the charger.
, The flashing light of the battery level indicator
indicates that the toothbrush is charging.
Note: It can take up to 48 hours to fully charge the
battery, but the Philips Sonicare may be used before it
is fully charged.
Using your Philips Sonicare

Brushing instructions

1 Wet the bristles and apply a small amount of
toothpaste.
2 Place the toothbrush bristles against the teeth
at a slight angle (45 degrees), pressing firmly to
make the bristles reach the gumline or slightly
beneath the gumline.
Note: Keep the center of the brush in contact with the
teeth at all times.
ENGLISH
7