ProGear RIDEFREE Owner's Manual page 30

ASSEMBLE CHAIN COVER
6
STEP 6.A
Obtain chain cover screw from frame.
30
STEP 6.B
Assemble chain cover on frame.
PEDAL INSTALLATION
7
LEFT
STEP 7.A
To fit your pedals, start by identifying left and right pedals. These will be marked
'L' and 'R' for left and right.
STEP 7.B
Insert the right pedal by screwing it in CLOCKWISE
like a normal screw. Tighten as far as possible.
R
NOTE: The right hand side of the bike is the
chainwheel side of the bike.
STEP 7.C
Insert the left pedal by screwing it in COUNTER -
CLOCKWISE the opposite of a normal screw.
Tighten as far as possible.
NOTE: If you were to sit on the bike holding the
handlebars, your left foot would be the left pedal
Tightening the pedal the incorrect direction could potentially
WARNING
damage the threading.
STEP 7.D
Tighten both sides with a 15mm wrench. Ensure the
crank is tightened for safety purposes.
Failure to securely tighten the crank may cause damage to
WARNING
your bike.
RIGHT