ProGear RIDEFREE Owner's Manual page 16

16
GEAR AND BRAKE CABLES
Inspect all cable housing for damage. Replace if necessary.
Clean and examine all cable wires for kinks and frayed ends. Replace if necessary.
Adjust barrel adjusters and/or cable anchor bolts to compensate for cable stretch.
HUBS
Check front and rear hub bearings for excess play or binding. Have adjustable cup-and-cone bearings,
tightened or loosened if necessary.
Check hubs are correctly lubricated.
Tighten hub axle nuts and check quick release levers.
FRONT AND REAR DERAILLEURS
Clean derailleur cages bushings.
Check the accuracy of the indexing and adjust cable tension at barrel adjusters and/or cable anchor
bolts as required.
BRAKES
Check brake block and brake lever mounting bolts.
Check brake blocks for wear. Replace if necessary.
Check block toe-in is correct.
Lubricate brake pivot bolts and adjust where necessary.
CRANK/CHAINRINGS AND FREEWHEELS
Clean chainrings; check they are true and have no excessively worn, or broken teeth.
Check crank arms are tight on bottom bracket spindle.
Clean and lubricate freewheel and check for wear.
Check freewheel sprockets for worn or broken teeth.