ProGear RIDEFREE Owner's Manual page 10

10
QUICK RELEASES
Are the front wheel, rear wheel and seat post quick releases properly adjusted and in the locked
position? Check all quick release mechanisms are correctly and securely closed.
CHECK LIGHTS AND REFLECTORS
Working.
Correctly aligned.
HANDLEBAR AND SADDLE
Are the handlebar and saddle system: horizontal? tight enough so they won't twist? handlebars
secure, good condition? handle bar ends plugged?
Is a bell fitted and working?
Any broken or worn parts should be replaced before the bicycle is used.
Certain activities may damage your bicycle and result in serious personal injury. Take these precautions:
avoid jumping kerbs.
avoid potholes and gratings.
avoid stunt riding and jumping.
WARNING: Do not remove protective safety equipment fitted to your bicycle, including handlebar
end covers or plugs; reflectors fitted to frame, wheels and pedals; reflector mount brackets (where
cantilever brakes are fitted); front chain ring guard; rear wheel spoke protector (right hand side);
chain guard where fitted; warning stickers affixed to frame.
NOTE: A replacement fork must be the same length and maintain the same rake and
trail characteristics as the original. Ask your bicycle retailer for advice.