ProGear RIDEFREE Owner's Manual page 27

ASSEMBLE REAR FENDER & REAR WHEEL
2
STEP 2.A
Assemble rear fender support on
rear frame using M6X12 hexagon
bolt, flat pad.
STEP 2.B
Assemble the rear fender on
fender support , use M5*12
socket screw flat pad & nylon
nuts.
STEP 2.C
Assemble the rear light on rear
fender.
STEP 2.D
Assemble rear left and right wheel as shown, adjust the angle then tighten bolts.
STEP 2.E
Final assembly shown.
27