ProGear RIDEFREE Owner's Manual page 28

CONNECT FRONT AND REAR FRAME &
3
ASSEMBLE CHAIN
STEP 3.A
Connect the front and rear frame and attach as shown.
Do not tighten as you will need to adjust the frame after
NOTE
assembling the chain.
28
STEP 3.B
Put the chain on front and rear
chain-ring and cog.
STEP 3.C
Use small chain links to attach
chain.
ASSEMBLE BASKET
4
STEP 4.A
Assemble bottom basket first.
STEP 4.B
Attach using basket buckle as shown in figure 22 using M6X40 screw, flat pad &
nylon nuts.