ProGear RIDEFREE Owner's Manual page 17

BOTTOM BRACKET/AXLE
Test bottom bracket bearings for excess play or binding.
Check that the locknut is tight.
Check bottom bracket is correctly lubricated.
HEADSET
Check headset for excess play or binding.
Check the locknut is tight.
PEDALS
Check pedal bodies are not cracked.
If pedals are loose, tighten the mounting bolts firmly.
Inspect toe clips/toe straps for damage.
GENERAL
Check frame alignment and all the tubes for dents or damage.
Check all bolts and nuts are secure. Tighten bolts with the correct tools.
CAUTION: Alloy bicycle parts can be damaged by overtightening.
STORAGE
The best protection for your bicycle is to store it under cover in a dry environment and away from
corrosive materials such as battery acid and swimming pool chemicals. Thoroughly dry off your
bicycle after use in wet conditions. Wax or lubricate as required.
Failure to follow this procedure may lead to rust and corrosion of metal work.
17