Warranty And Support; Troubleshooting - Philips AVENT Premium SCF398 Manual

English
24
5. Remove the frame
from the motor unit.

Warranty and support

If you need information or support, please visit www.philips.com/support or read the international
warranty leaflet.

Troubleshooting

This chapter summarizes the most common problems you could encounter with the appliance. If you
are unable to solve the problem with the information below, visit www.philips.com/support for a list
of frequently asked questions or contact the Consumer Care Center in your country.
Problem
I experience pain when I
use the breast pump.
The breast pump does
not switch on while it is
connected to the wall
socket.
6. Cut or fold the edges
of the plastic battery
frame. Remove the
battery from the plastic
battery frame.
Solution
-
Choose a suction level that is comfortable for you.
-
Check if the silicone diaphragm is undamaged (does not have small
cracks, holes etc.).
-
Ensure that your nipple is placed in the center of the cushion.
-
If the pain persists, stop using the breast pump and consult your
healthcare professional.
-
Only use the adapter supplied.
-
Make sure that the adapter has been inserted correctly into the wall
socket and that the small plug has been inserted correctly into the
motor unit.
-
Connect the adapter to another wall socket. Then press and hold the
on/off button to check if the breast pump can be switched on.
-
If the problem persists, contact the Consumer Care Center via
www.philips.com/support.
Note: Dispose of the
rechargeable battery at a
separate local collection
point. Other parts can be
disposed at a specific
place for disposal of
electric equipment.