FLIR FB Series Installation And User Manual page 54

Advanced Configuration
Upload & Download
The Download button is used to save a copy to a PC for
safe keeping. A pop-up window will ask for a file name
and destination folder.
To transfer a configuration file (server.ini) from a PC to
the camera, use the Browse button to select the file on
the PC, then use the Upload button to upload the file.
After a file upload you must stop and restart the server.
Factory Defaults
Select Full Restore to return the camera its original factory configuration.
Select Partial Restore to maintain network and IP settings while returning all other settings to the
factory configuration.
Log Page
Use the Log page to set logging parameters. Scroll down and select the Download button under
Field Support Log to download a zip file to the computer for field service evaluation.
427-1065-00-12 Revision 130 November 2019 54
This document does not contain any export-controlled information.