FLIR FB Series Installation And User Manual page 45

Advanced Configuration
IOI Interface
Install this interface to hand-off FB-Series ID detection events to the PTZ Tracker (trk-101-P). In
order to implement a hand-off from the FB-Series ID camera to a PTZ camera, the FB-Series ID
camera and trk-101-P are bound together from the web interface of the trk-101-P or from the FLIR
Latitude Network Video Management System. Users can define perimeters and areas for the FB-
Series ID camera to monitor (refer to
moving object is detected by the FB-Series ID, the trk-101-P can control and move the PTZ camera
to autonomously track and zoom in on the motion.
Select Maintenance > Sensor > VMS Remote.
Step 1
Step 2 Click + ( ).
Step 3 From the drop-down list,
select IOI Interface.
Click Create.
Step 4
Step 5 Accept the message "Data for INTERFACE2 saved
correctly".
Step 6 Using the Start button at the bottom of the page,
Stop and Start the server.
Click Accept at the prompt.
The status will show Server Stopped.
Click on the Start button again to restart the server.
Click Accept at the prompt.
The status will show Server Running.
427-1065-00-12 Revision 130
Video Analytics Setup—FB-Series ID Only, pg.
November 2019
This document does not contain any export-controlled information.
37). When a
Click
Select
Click
45