FLIR FB Series Installation And User Manual page 17

Basic Operation and Configuration
In the lower right of the web page there is a frame rate selector. This selector allows the user to
change the rate at which the frames are displayed in the browser from the default 8 fps up to 16 fps.
This rate controls the user's own web browser only, and does not affect the video streams to other
users or to an NVR. For slow communication links, if there is a problem displaying the video image,
it may help to slow down the frame rate.
Help
The Help menu displays software version information. If it is necessary to contact FLIR Technical
Support for assistance, it will be helpful to have the information from this page on hand. For
Product Info Menu, pg. 56
information about the camera refer to (requires Admin login).
Log out
Use this button to disconnect from the camera and stop the display of the video stream. If a web
session is inactive for 20 minutes, it will be stopped and it will be necessary to log in again.
Toggle PC/Camera time
Date
Use this button to display either the PC time or the camera time. To set the camera time refer to
and Time, pg. 22.
Camera Control and Status
In the lower left of the screen are two indicator "lights": Control and Status.
Initially the Control light is off, as in the image above, indicating the user is
not able to control the camera immediately. When multiple users are
connected to a camera, only one user at a time can issue commands to the
camera. If another user has control of the camera, the Control light is yellow.
A user is able to request control of the camera by clicking on the yellow or black "light", or simply by
sending a command to the camera. The Status light may turn off temporarily while waiting for the
response from the camera. After a short pause, the Control light should turn green.
If a command is sent to the camera when the user does not have control, the command will not be
executed, and it is necessary to send the command again once the light is green.
In addition, when the cursor is moved over the video, a snapshot button also appears in the
upper right of the screen. After clicking the snapshot button, the video image is saved as a
jpeg file and the browser will provide prompts depending on which browser is being used.
Web Control Panel
The control buttons on the right side of the page provide a way to
control the camera in a limited number of ways. When the mouse
cursor is positioned over a button, a tool tip is displayed.
This same web interface is used with various FLIR cameras—
some are fixed, such as the FB-Series cameras, and some are
pan/tilt cameras. The control panel may appear different for
different FLIR cameras.
427-1065-00-12 Revision 130 November 2019 17
This document does not contain any export-controlled information.