Related Manuals for Lumantek ez-SHV+
Summary of Contents for Lumantek ez-SHV+
- Page 1 SDI to HDMI Converter with Display and Scaler Operation manual Manual Updated December. 2018...
- Page 2 Copyright © 2006~2019 LUMANTEK Co., Ltd. All Rights Reserved This document contains information that is proprietary to LUMANTEK. CO., LTD. The information in this document is believed to be accurate and reliable; however, LUMANTEK assumes no responsibility or liability for...
-
Page 3: Audio Out
01. ez-SHV+ (SDI to HDMI Converter with Display and Scaler) Lumantek's ez-SHV+ is an SDI to HDMI converter with Display and Scaler. The ez-SHV+ does more than just coverting. Through its 2.7 inch TFT-LCD, it dislays the video input. The display also shows an eye pattern for video quality monitoring, the resolution of incoming video and approximate cable length relative to the quality of the video. -
Page 4: Specifications
02. Interface 02. Interface DIP Switch Settings Specifications DC Input SDI OUT DC Power Input SDI Video loop output port VIDEO OUT : Video output resolution (Position 1, 2, 3, 4) +5V to +18V SDI IN SDI Video DIP Switch input port Resolution and other - 720x480i@59.94 (DIP SW : 1111) - Page 5 02. Interface 02. Interface LCD Displays LCD Displays Input Resolution HDMI output resolution HDMI output ① LCD Display ON/ OFF SDI Input resolution * Resolution configured resolution * Shown as “Unknown” through DIP Switch * Resolution where there is no input. configured * If input is 3G Level-B, through DIP...
- Page 6 02. Interface 02. Interface LCD Displays LCD Displays ② SDI input eye pattern ON/ OFF ③ LCD monitor rotation (by 0 or 180 degrees) Turn off the display by pressing Turn off the display by pressing and holding the mode switch and holding the mode switch for less than 6 sec.
- Page 7 02. Interface 03. Product Configuration LCD Displays ④ ON/OFF HDMI mirrored output for teleprompter ez-SHV+ AC to DC adapter HDMI Output Please TURN OFF the LCD Display first. *Please refer to page 00 for the LCD TURN ON the mirrored output Display ON/OFF application by pressing the mode *Supports only HD resolutions...
- Page 8 04. Technical Specifications Data Input Connections SDI Video Input: SD/HD/3G-SDI (BNC Power : DC Power Input (DC Jack) x1 75Ω) x1 DIP Switch : (6 Pole) x1 Video In/Out Video Formats: Resolution, Video Output Ratio, LCD - 720x480i@59.94/60 Brightness - 720x576i@50 MODE : (Push Switch) x1 LCD ON/OFF, - 1280x720p@50/59.94/60 Menu Selection...
-
Page 9: Customer Services
CUSTOMER SERVICES gs@lumantek.co.kr TEL(Dir) : +82-2-6947-7429 FAX: +82-2-6947-7440...
Need help?
Do you have a question about the ez-SHV+ and is the answer not in the manual?
Questions and answers