G500 Substation Gateway
Chapter 3: Installing the G500
Installation
Mounting instructions
Screws
G500 SUBSTATION GATEWAY INSTRUCTION MANUAL
Installing the G500
This chapter covers the installation of the Industrial Computer and initial power-on
operations.
Before you install and operate the G500, read and follow the safety guidelines and
instructions in "Safety precautions" on page 11.
The G500 is mounted in 3U slot of a 19" rack by use of 6 screws compliant to IEC60297-3
with STD hole Pattern.
Use screws with a shaft diameter close to 5mm. For example, M5 or UNF 10-32 screws.
GE INFORMATION
19