Steps
1. Align the screws on the battery with the screw holes on the palmrest assembly and place the battery.
2. Tighten the four captive screws that secure the battery to the palmrest assembly.
Next steps
1. Reconnect the
battery
2. Install the
base
cover.
3. Follow the procedure in
Solid-state drive
Removing the 2230 Solid State Drive
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Disconnect the
battery
About this task
The following images indicate the location of the SSD (solid state drive) and provide a visual representation of the removal procedure.
30
Disassembly and reassembly
cable.
After working inside your
computer.
Before working inside your
cable.
computer.