3. Disconnect the
battery
About this task
The following images indicate the location of the WLAN antenna and provides a visual representation of the disconnection procedure.
Steps
Disconnect the two antenna cables from the WLAN module
NOTE:
Since the WLAN card is soldered onto the system board, it cannot be removed. In case of WLAN failure, the
system board needs to be replaced.
Heatsink assembly
Removing the heatsink assembly
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Disconnect the
battery
About this task
The following images indicate the location of the heatsink assembly and provide a visual representation of the removal procedure.
cable.
Before working inside your
cable.
computer.
Disassembly and reassembly
37