Figure 4. 2280 SSD
Steps
1.
NOTE:
Install the M.2 2230 SSD to the thermal bracket so that the top side of the SSD (with the sticker) is facing
up.
Place the thermal bracket on top of the SSD covering it completely.
2. Connect the SSD to the M.2 port on the system board and replace the single (M2x2) screw securing it to the system board.
Next steps
If you are replacing a component, remove the existing component before performing the installation procedure.
1. Reconnect the
battery
2. Install the
base
cover.
3. Follow the procedure in
WWAN card
Removing the WWAN card
Prerequisites
1. Follow the procedure in
34
Disassembly and reassembly
cable.
After working inside your
computer.
Before working inside your
computer.